Attachments for PTO tractors up to 170 HP
B20
Mulcher, shredder and harvester: all in one machine! 130-200 HP
- 4-in-1 mulcher: collects-mulches-shreds-conveys
- Mulches brush & wood up to 20 cm [8”] Ø
Read More...
The world’s first 4 in 1 Mulcher:
Collects – Mulches – Shreds – Dispenses Biomass on any trailer.
The SEPPI B20 mulcher & shredder simplifies and completes the work more efficiently reducing your costs.
B20 mulches brush and wood up to 20 cm Ø, thanks to a powerful, aggressive rotor, with SEPPI M patented fixed tools system. The SEPPI B20 collects biomass from the surface, thanks to the double pick-up device. The pick-up rotors easily transfer raw material to the rotor shaft for the first stage of mulching. Next, a powerful, specially designed disk chipper with HSS steel blades reduces the material to a fine grade which is immediately vacuumed and expelled through an expulsion chute positioned on one side of the tractor. SEPPI B20 is a 4-in-1 mulcher: collects-mulches-shreds-conveys.
SEPPI B20 is perfect for use with reverse-drive tractors. The rear thrust connection allows the B20 to easily chop residual wood, logs and large-diameter plants.
B20’s expulsion chute is controlled by the operator using a hydraulic system (wheel up to 190 °): moreover, its inclination and the adjustable “spout” opening of the expulsion chute make it suitable for any trailer pulled by a second tractor in parallel for collection of the fine biomass. During transport, the SEPPI B20 expulsion chute can be withdrawn hydraulically.
Available working width: 150 cm [59″]
STANDARD VERSION
- Renewal of old orchards
- Care of olive groves
- Clearing of site for replanting
- Collection of biomass for composting
- Environmental clearing in urban or forestry areas
- any conditions in which the area must be cleaned of plant residues
B20 – STANDARD VERSION
- B20 mulches brush&wood up to 20 cm [8”] Ø
- Working speed 0-2 km/h
- Rotor with tungsten carbide hammers MINI DUO; anti-wear hammer support
- 2 hydraulic pick-up rotors
- ISO 3-point rear linkage cat. 3, push drive (Reverse drive system recommend, front attachment not possible)
- Disk chipper with with exchangeable wear plates and with internal blades made of wear resistant steel
- Hydraulically adjustable chute
- 750 rpm gearbox
- Dual side belt transmission (2×5)
- Hydraulically adjustable chute and deflector
- Support roller
- Colour: red RAL 3020
OPTIONS
- PTO drive shaft
- Chevrons
S7 drago
mulcher with collection into trailer 60-120 HP
- Would you like to gather the mulch in your orchard? This is the right dragon!
- Mulches grass and prunings up to 7 cm [2.8”] Ø
Read More...
Universal powerful SEPPI M. flail mulcher S7 drago with a chute for collecting the mulching material.
The mulched material is taken up the chute and can then be collected and carted away in a trailer, leaving the soil clear of material. The SEPPI S7 drago mulches grass and prunings up to 7 cm [2.8”] Ø from the floor for further use. Various materials, leaves and biodegradable waste can be mulched and collected. Helical distributed and high resistent SMO flails for universal use are for high cutting quality at uniformly distributed power. SEPPI S7 drago casing is very resistent, made of high-tensile steel S420. Counterknives inside the casing will give a perfect result when mulching. Support roller with double tapered roller bearings unit for a long life and the low maintenance costs. Adjustable large diameter roller positioned close to the rotor improves mulching on uneven ground and prevents scalping.
The optimum aerodynamics and airflow and high suction effect of SMO hammers offer a perfect ejection of mulched material by ejection chute into the collecting trailer. The S7 drago mulcher works at speed of 3-10 km/h.
The SEPPI S7 Drago collection mulcher can be used everywhere where the mulched material (grass, wood, leaves, biomass, cow dung, horse paddocks, …) should be removed from the surface.
Available working width: 150, 200 cm [59″, 79″].
APPLICATIONS
- Collection of material in orchards or vineyards
- Clearing of site for replanting
- Collection of biomass for composting
- Environmental clearing in urban areas
- Clearing of horse and cow dung
STANDARD VERSION
- S7 drago mulches grass and prunings up to 7 cm [2.8”] Ø
- Rotor with SMO flails
- With chute for material collection into trailer
- Hydraulically adjustable shute
- Working speed 3-10 km/h
- ISO 3-point rear linkage cat. 2 central fixed
- Gearbox 540 rpm with freewheel
- Input shaft 1 3/8” Z=6
- Draw bar
- Support roller
- Front and rear protection: chains
- Colour: red RAL 3020
OPTIONS
- PTO drive shaft
- 1000 rpm gearbox
- Hyd. sweeper XAN with 3 vanes
- Trailer 1,5 m3 [91,540 inch3]
MIDIFORST drago
discharge forestry mulcher with collection into trailer 100-190 HP
- Universal powerful forestry mower with a chute for collecting the mulching material.
- Mulches wood up to 15 cm [6”] Ø
Read More...
The mulched material is taken by a conveyer belt up the chute and can then be collected and carted away in a trailer, leaving the soil clear of material. The MIDIFORST drago mulcher collects wood up to 15 cm [6“] from the forest floor for further use. As well as wood various other materials such as grass, leaves and biodegradable waste can be mulched and collected. Aerodynamic chute transports dry and also wet material in large quantities to the top for efficient discharge. The chute is with hydraulic folding, also the chute deflector is hydraulicaly adjustable. Wear-resistant conveyor belt for high discharge. 4 staggered rows of counterknives inside the casing will give a perfect result when mulching.
MIDIFORST Drago has a draw bar for attachment of a trailer.
Productivity 30-60 m3/h [39 – 78 yd³/h] by typical applications.
Available working width: 200 cm [79″]
STANDARD VERSION
- Collection of material for energy production
- Clearing of site for replanting
- Collection of biomass for composting
- Environmental clearing in urban areas
STANDARD VERSION
- Mulches wood up to 15 cm [6”] Ø
- With chute for material collection into trailer
- Hydraulically adjustable chute
- Standard rotor: combination of fixed tungsten carbide tips hammers and SMW flails
- Working speed 0-5 km/h
- ISO 3-point rear linkage cat. 2 central fixed
- 1000 rpm gearbox with freewheel
- Shaft input 1 3/8” Z=6
- Double drive with 10 belts
- Trailer hitch
- Support roller
- Adjustable rear hood with variable rakes
- Front and rear protection with chains
- Colour: red RAL 3020
OPTIONS
- PTO drive shaft
- Chevrons