Offsetting and roadside mowers – attachment for PTO tractors
L9 flex
NEW! Offsetting mulcher 100-180 HP
- Hyd. positioning from +90° to -60°
- Hyd. parallel side shift107 cm
- Mulches grass and bushes up to 9 cm [3.5”] Ø
- PENTALINK system for more stability
Read More...
L9 flex is a professional SEPPI mulcher for for mulching vegetation along riverbanks and roadsides. The basic functions are hydraulic parallel side shift up to 107 cm [42″] and vertical positioning. The mulcher can be tilted using a hydraulic system and can reach a 90° above horizontal level and 60° below horizontal level. L9 flex mulches grass and bushes up to 9 cm [3.5”] Ø.
FLEX-SAFE Safety breakaway system – Unrivalled protection against accidental impact thanks to the FLEX-SAFE anti-collision system
HELIX ROTOR technology – with SEPPI SMO hammers – the mulcher works with low power consumption by highest performance .
SEPPI L9 flex has a strong and robust casing made of hightensile S420, with replaceable wearplates.
PENTALINK system – 3 point linkage cat. 3 and 2 additional attachment torsion arms, the implement is connected to the tractor’s axle and improves its stability.
WEAR PLATE – Long service life of the mulching body thanks to the interchangeable wear plate in tempered steel.
SPACE LINK – Easily follows the contours of the ground thanks to SPACE LINK suspension
Available working width: 175, 200, 225, 250, 275 cm [69″, 79″, 89″, 98″, 108″].
L9 flex – STANDARD VERSION
- Mulches grass and bushes up to 9 cm [3.5”] Ø
- Rotor with SMO hammers
- Working speed 3 -10 km/h
- PENTALINK system:3 point linkage cat. 3 and 2 additional attachment points
- Safety breakaway system FLEX-SAFE
- Hydraulic positioning from +90° to -60°
- Hydraulic parallel side shift 107 cm [42″] to the right
- Gearbox 540 rpm
- Input shaft 1 3/8” Z=6
- Transmission with 5 belts
- Support roller under the base unit,Support roller under the base unit,adjustable roller under the mulcher
- Rear protection with rubber flap
- Front protection with chains
- Required hydraulic fittings: 2 double acting
- Colors: red RAL3020 · charcoal RAL7021
OPTIONALS
- PTO drive shaft with double wide angle
- Gearbox 750 rpm or 1000 rpm
- Adjustable front hood
- Roller scraper
SMWA avs
offsetting mulcher 40-90 HP
- Mulcher with lateral, horizontal and vertical side shift.
- Mulches grass and prunings up to 5 cm [2”] Ø
- Hyd. positioning from +90° to -50°
- Hyd. side shift to the right up to 136 cm [54”]
Read More...
The SMWA avs is an offsetting mulcher ideal for areas hard to reach such as ditches, slopes and river banks but also does a great mulching job on steep road sides, orchards and vineyards. Great versatility is achieved by ample side shift in addition to hydraulic angling.
The SMWA avs can work from 90° up angling to 50° down angling, independent from the side shift, centrally behind the tractor, or offset to the side, and reach up to 274 cm [198“] to the right of the tractor center line, depending on the working width of the mulcher. Maximum side shift is 136 cm [54“]. High resistent thanks casing made of high-tensile steel and reinforced bearings. Two possibilities to place the gearbox: Gearbox inside of machine keeps the mower close to the tractor (appropriate e.g. for orchard rows). External gearbox (optional) allows large outrigging.
The optional safety breakaway system FLEX-SAFE™ prevents breakage of the linkage. Articulated attachment frame allows dynamic flexation.
Available working width: 155, 175, 200 cm [61″, 69″, 79″].
STANDARD VERSION
- Mulches grass and bushes up to 5 cm [2”] Ø
- Standard rotor with SMW flails
- Working speed 1-5 km/h
- ISO 3-point rear linkage cat. 2
- Hyd. positioning from +90° to -50°
- Hyd. side shift to the right
- Gearbox 540 rpm with through shaft
- Front protection: metal flaps
- Adjustable rear hood with rubber protection
- Support roller adjustable in height by 5 cm [2”]
- Colour: red RAL 3020
OPTIONS
- PTO drive shaft with freewheel
- Rotor with Y knives
- Front attachment
- External transmission
- Attachment with safety breakaway FLEX-SAFE™
- Lateral support rollers 160 mm [6”] Ø
- Side shift arms available in several lengths
SMO avs
offsetting mulcher 50-120 HP
- Strong road side mulcher for any working position.
- Mulches grass and prunings up to 7 cm [2.8”] Ø
- Hyd. positioning from +90° to -50°
- Hyd. side shift to the right up to 361 cm [142”]
Read More...
SMO avs is a very strong offsetting mower. It mulches grass and brush up to 7 cm [2.8“] in diameter. Hydraulic angling and hydraulic side shift make it possible to work in many different positions and situations. It is thus suitable for the maintenance of greenspace such as slopes, road sides, or of steep orchards and vineyards and also in forestry. As by all the SEPPI flail mulching mowers, it is possible to adjust the height of cut and the degree of mulching. Counterknives inside the casing will give a perfect mulching result.
The offsetting mulcher SMO avs can be hydraulically angled from +90° to -50°, indepentently from the side shift. Maximum side shift is 180 cm [71“]. With maximum side shift the mulcher can reach up to 361 cm [142“] to the right of the tractor center line, depending on the working width.
The safety breakaway system FLEX-SAFE™ in standard version prevents breakage of the linkage. Articulated attachment frame allows dynamic flexation.
Available working width: 175, 200, 225 cm [69″, 79″, 89″].
STANDARD VERSION
- Mulches grass and bushes up to 7 cm [2.8”] Ø
- Standard rotor with flails
≤ 200: SMO · ≥ 225: SMW - Working speed 1–8 km/h
- ISO 3-point rear linkage, cat. 2
- Safety breakaway FLEX-SAFE™
- Hyd. positioning from +90° to -50°
- Hyd. side shift to the right
- 540 rpm gearbox with cross shaft
- Input shaft 1 3/8” Z=6
- Number belts
up to L=200: 4; from L=225: 5 - Adjustable rear hood
- Front protection: metal flaps
- Support roller adjustable in height 5 cm [2”]
- Colour: red RAL 3020
OPTIONS
- PTO shaft with freewheel
- Rotor with Y knives
- Roller scraper
- Lateral support rollers 160 mm [6″] Ø
SAV
roadside mulcher SAV 80-150 HP
- Offsetting mulcher for ditches and large areas.
- Also forestry version available
Hyd. positioning from +90° to -65°
Mulches grass and bushes up to 12 cm [4.7”] Ø
Read More...
SAV is a professional side mulcher for ditches, canals and river banks. This universal mulcher also does a great mulching job on steep road sides, orchards and vineyards or also in forestry.
Great versatility is achieved by ample hyd. side shift in addition to hydraulic angling from 90° up to 65° down. SAV mulches grass and brush up to 7 cm [2.8“] in diameter, or up to 12 cm [4.7“], if equipped with forestry rotor. Rear flap with direct discharge. The large diameter roller, helps mulching on uneven ground. Cover with easy access to the drive system provides extra protection and keeps out dirt. Belt transmission with spring tension and safety coupling.
According to the working width, the mulcher reaches a maximum position of 472 cm [186”] to the right.
Available working width: 175, 200, 225, 250, 275 cm [69″, 79″, 89″, 98″, 108″].
SAV STANDARD VERSION
- Mulches grass and bushes up to 7 cm [2.8”] Ø; up to 12 cm [4.7″] Ø with forestry rotor
- Standard rotor with flails:≤ 200: SMO · ≥ 225: SMW
- Working speed 3 -10 km/h
- ISO 3-point rear linkage cat. 2
- Hyd. positioning from +90° to -65°
- Hyd. side shift to the right
- Gearbox
up to L=200: 540 rpm; from L=225: 1000 rpm - Input shaft 1 3/8” Z=6
- Transmission with 6 “Power-Belts”
- Belt cover including chevrons
- Adjustable support rollers on hitch and mulching mower
- Front protection: chains
- Rear protection: rubber flap
- Breakaway device
- NEW! colour: red RAL 3020
OPTIONS
- PTO drive shaft with freewheel
- Rotor with Y knives
- Forestry rotor with fixed carbide hammers MINI DUO (up to 200)
- Forestry rotor with swinging hammers (up to 200)
- 540 rpm gearbox or 1000 rpm gearbox
- Suspension with accumulator to adapt the contours of the ground