Attachments for PTO tractors up to 180 HP
SMO pick-up
mulcher with pick-up device 50-100 HP
- Flail mulcher for orchards and vignards with pick-up rotors to gather and mulch accumulated prunings.
- Modular lower pick-up kit for material feed with grid and with pick-up rotor
- Mulches grass and prunings up to 7 cm [2.8”] Ø
Read More...
With the strong KASTOR™ stump cutter elimination of stumps and wood is easy and very fast, no matter what their diameter. A circular mulching disk moves and chips away the wood. The cutter wheel movements are controlled by hydraulic cylinder, to push the cutter wheel teeth laterally through the stump and to raise and lower the cutter wheel. The rotor-disk of KASTOR stump grinder with very aggressive fixed carbide teeths can completely destroy tree stumps of any diameter permanently.
Rotor disc: 11 cm [4,3″] strong – diameter: 90 cm [35″]
APPLICATIONS:
- Grinding stumps to clear streets, parks and other open spaces
- Road sides maintenance
- Clearing open spaces
- Forming trenches to lay cables
- Cutting of stumps in forestry
- Maintaining of power and communication lines
- Preparing soil for plantation of new trees
STANDARD VERSION
- Grinds stumps as deep as 35 cm [14”] below the surface and any diameter
- Rotor-disk with fixed carbide teeths
- ISO 3-point rear linkage cat.2
- Hyd. outrigging (side shift): 110 cm [43“]
- 1000 rpm gearbox with freewheel
- Double transmission with 10 belts
- Hydraulic outrigging 55 cm [21,7“] to the left and right
- Hydraulically operated hood
- Protection with double chains
- Standard hammers: fixed knives with tungsten tips
- Colour: red RAL 3020
OPTIONS
- Wide angle PTO drive shaft
- Electric control
- Support wheels to set height
WBS pick-up
mulcher with pick-up device 90-180 HP
- Strong flail mulcher with pick-up rotor and mulching grid. For prunings in almond, citrus and olive plantations. The result is a very fine mulch that will easily decompose.
- Mulches grass and prunings up to 11 cm [4.3”] Ø
- Pick-up kit for material feed with grid inclusive rotor
Read More...
SEPPI M. pick-up mulchers mulch finely, through a fine mulching grid. This results in a fast biodegradation, within one season.
The WBS pick-up is a heavy mulcher for bushes and very strong prunings, suitable for olive, walnut and almond cultivations, orchards and vineyards and stony conditions. The machine is fast, it collects and mulches finely 100% of the prunings in one single pass.
The Prunings are lifted from the ground and processed through a screen; therefore no contact between the hammers and ground. The prunings are then processed within a screen to produce a fine and uniform mulch.
WBS pick up casing is very resistent, made of high-tensile steel. Standart is the mulcher equiped with the Pick-up kit for material feed with grid inclusive rotor. The rotor with tungsten carbide fixed hammers is very agresive and resistent. WBS pick up mulchs grass, brush and wood
up to 11 cm [4,7”] in diameter. An additional fine mulching screen is available as an option.
Rubber gauge wheels protect the roller on uneven and stony ground and if there are stones.
Available working width: 175, 200, 225, 250 cm [ 69″, 79″, 89″, 98″].
Very strong flail mulcher with pick-up system for a very fine mulch in orchards: The WBS pick-up is a heavy mulcher for bushes and very strong prunings. The pick-up system collects piled up prunings from the soil and produces a very fine mulch that will quickly decompose.
MOST COMMON AREAS OF USE
- Citrus cultivations
- Olive plantations
- Almond and walnut cultivations
STANDARD VERSION
- Mulches grass and prunings up to 11 cm [4.3”] Ø
- Working speed 1–3 km/h
- Double pick-up rotor
- Standard tools: tungsten carbide fixed hammers
- Gearbox 1000 rpm
- Input shaft 1 3/8” Z=6
- 5 belts
- 2 independent hydraulic circuits for pick-up rotors
- Anti-wear mulching grid
- Rear hood with manual opening
- 4 support wheels for road transport, with hydraulical adjustment
- Rear protection: rubber flap
- Rotation sense inversion
- Remote control
- Speed control
- Colour: red RAL 3020
OPTIONS
- PTO drive shaft with freewheel & wide angle
- PTO drive shaft with torque limiter
- 540 rpm gearbox
- Fine mulching screen for almond prunings
- Draw bar with side shift
MINIFORST pick-up
mulcher with pick-up device 80-120 HP
- Strong pick-up mulcher for cultivations with very thick and bulky wood, like olive and citrus
- Forestry mulcher mulches bushes up to 12 cm [5”] Ø
- Mulcher with pick-up mulches bushes up to 25 cm [10”] Ø
Read More...
Certain crops produce very high quantities of prunings. This can cause big problems when it is time to mulch them. Burning is often illegal and is always bad for the environment. The SEPPI Miniforst Pick-Up Mulcher provides a perfect solution – picking up the prunings with a pick-up reel at ground level and, if needed, reinforcing the feed into the machine with an optional top reel. The prunings are then processed within a screen to produce a fine and uniform mulch.This results in a fast biodegradation, just one cultivation cycle.
The MINIFORST pick-up mulcher is particularly suitable for olive, citrus, walnut and almond cultivations and stony conditions
– the machine is fast
– it collects and mulches finely 100% of the prunings in one single pass
– different tools of choice – long fixed hammers lifetime
– prunings are lifted from the ground and processed through a screen; therefore no contact between the hammers and stones.
SEPPI MINIFORST pick up casing is very resistent, made of high-tensile steel. Counterknives inside the casing will give a perfect result when mulching. Standart is the mulcher equiped with the Pick-up kit for material feed with grid inclusive rotor. The rotor with tungsten carbide fixed hammers is very agresive and resistent. MINIFORST pick-up mulchs grass, brush and wood up to 20 cm [10”] in diameter and more. Standard euipped with RIC – Radial interference cut rotor (patent SEPPI M.), upper pick up rotor, motor and flow control. Additional pick-up kit (option), consisting of frame with lower pick-up rotor, adapted skids, motor and hydraulic system with flow divider and pressure gauge for easy control of the pick-up movement.
Available working width: 150, 175, 200 cm [ 59″, 69″, 79″].
MOST COMMON AREAS OF USE
- Citrus cultivations
- Olive plantations
- Almond and walnut cultivations
MINIFORST pick-up STANDARD VERSION
- Mulches wood up to 20 cm [8”] Ø and occasionally larger diameters
- RIC-rotor with SUPER MONO TIP hammers with tungsten carbide tip
- 4 rows of replaceable tempered counter cutters
- Working speed 0-5 km/h
- ISO 3-point rear linkage central fixed cat. 2 (for pushed machines only)
- 540 rpm gearbox with freewheel and through shaft
- Input shaft 1 3/8” Z=6
- 5 belts
- Hydraulic hood with pick-up rotor, includes motor and hydraulic system with flow control
- Required hydraulic flow: 20 l/min [5,3 gpm]
- Skids adjustable in height
- Support roller with serrated metal wheels, adjustable in height
- Colour: red RAL 3020
OPTIONS
- PTO drive shaft
- ISO 3-point linkage central fixed cat. 1 & 2
- Front attachment
- Lower pick-up kit including motor and flow divider
- 1000 rpm gearbox
- Rubber gauge wheels instead of roller